PHOTOS
※ Please Click Image to Enlarge
705
905X
FEATURES
This model is specially designed with accumulator head configuration for producing PE barrels with capacity of 10 to 75 liters, such as chemical drums, petrol drum, toolbox, etc., the mold platen is parallel to the screw, the extruder base and die head can be adjusted up/down, right/left directions for convenient mold adjustment.
Optional Equipment：
1. Can be equipped with take-out robot 2.MOOG 30/100 point parison control available.
This machine is suitable for producing:
Chemical drums, toys, automotive parts and the maximum capacity is 1000 liters.
LL Ring barrel, Picnic tables, tool boxes, etc., PE blow molding products.
Product specifications:
1.PBI-705X 2.5Kg Accumulator head.
2.PBI-905X 3 to 5Kg Accumulator head.
3.PBI-1005X 10Kg Accumulator head.
4.PBI-1205X16 to 25Kg Accumulator head.
5. Customized machine design is available to meet specific requirements.
Product specifications:
1. Energy saving hydraulic system.
2. Accurately controls parison profile, whether thin or thick, the bottle surfaces are all smooth and shiny.
3. MMI (man-machine interfacing) control panel.
4. Customers can choose machine models according to product capacity (or product weight).
5. With inner gear rotatory equipment , LL Ring equipment, fast material output takes 2.5 seconds, 30 point mold.
Optional Equipment：
1. Can be equipped with take-out robot 2.MOOG 30/100 point parison control available.
This machine is suitable for producing:
Chemical drums, toys, automotive parts and the maximum capacity is 1000 liters.
LL Ring barrel, Picnic tables, tool boxes, etc., PE blow molding products.
Product specifications:
1.PBI-705X 2.5Kg Accumulator head.
2.PBI-905X 3 to 5Kg Accumulator head.
3.PBI-1005X 10Kg Accumulator head.
4.PBI-1205X16 to 25Kg Accumulator head.
5. Customized machine design is available to meet specific requirements.
Product specifications:
1. Energy saving hydraulic system.
2. Accurately controls parison profile, whether thin or thick, the bottle surfaces are all smooth and shiny.
3. MMI (man-machine interfacing) control panel.
4. Customers can choose machine models according to product capacity (or product weight).
5. With inner gear rotatory equipment , LL Ring equipment, fast material output takes 2.5 seconds, 30 point mold.
SPECIFICATIONS
- SPEC
| SM Model No. | Unit | PBI-705X-PE | PBI-905X-PE | PBI-1005X-PE |
| Main Screw Diameter | mm | 75 | 90 | 100 |
| Main Screw L/D ratio | L/D | 24/1 | 24/1 | 24/1 |
| Frequency conversion motor | HP | 40 | 50 | 75 |
| Screw rotating speed | r.p.m | 30~80 | 30~70 | 25~68 |
| Number of heaters | Zone | 7 | 9 | 7 |
| Heating capacity | KW | 20 | 30 | 45 |
| Extruding capacity per hour | kg/hr | 100 | 135 | 200 |
| Roll Outer Diameter | mm | 200 | 260 | 360 |
| Mold center distance | mm | / | / | / |
| Reserves/shot size | liter | 2.5 | 5 | 8 |
| Switch on/off mold imitation | mm | 400~1000 | 400~1200 | 400~1450 |
| Mold length | mm | 300~800 | 350~1200 | 500~2000 |
| Mold width | mm | 700 | 900 | 830 |
| Dry cycle per hour | Time / hr | 600 | 400 | 350 |
| Pump driven motor | HP | 40 | 60 | 75 |
| Clamping force | Ton | 28 | 53 | 103 |
| General thickness & thinness control | PH | 5 | 5 | 5 |
| Fuel tank capacity | Gallon | 120 | 200 | 250 |
| Pressure of air | Kg/cm2 | 5~8 | 6~10 | 6~10 |
| Air Consumption | HP | 5 | 7.5 | 10 |
| Min/Max diameter of product | mm | 150~350 | 150~400 | 180~500 |
| Weight of product | g | / | 50 | / |
| Product capacity | C.C. | 10-25liter | 15-40liter | 30-100liter |
| Total power consumption | Kw/ h | 80 | 83 | 105~135 |
| Net Weight | kg | 10000 | 11500 | 15000 |
| Gross Weight | kg | 12500 | 14500 | 18000 |
| Size | m | 5.4*2.3*3.9 | 5.8*2.5*4.6 | 5*2.3*3.34 |
| Volume | m | 5.6*2.5*4.1 | 6.0*2.7*4.8 | 5.61*2.44*3.6 |
